Our upgraded line of I/O modules designed to simplify data integration with your rugged applications.
Power Supply & Analog Inputs
Power Supply:
- Operating Voltage: 7-35 VDC
- Nominal Current: 30-40 mA
- Sleep Mode: Not Available
Analog Inputs:
- 12 Bit A/D Converter, 4096 bits resolution
- 4 Configurable Inputs (Digital/Resistive/Voltage/Current)
Resistance Mode:
- Range: 0 to 10K ohm, 1K ohm internal pullup
- Resolution: 0-1K ohm (1 ohm), 1-5K ohms (5 ohms), 5-10K ohms (15 ohms)
Voltage Mode:
- Low Range: 0-4.6Vdc, 1.2mV resolution
- High Range: 0-32Vdc, 8mV resolution
Current Mode:
- Range: 0-23mA, 0.006mA resolution
- 4-20mA mode with 200 Ohm Shunt Resistor
Digital & Frequency Inputs
Digital Inputs:
- Configurations: Open, Closed to B+, Closed to B-
- Switch Current: 3mA @ 12Vdc, 10mA @24Vdc (Closed to Battery Positive), 5mA @12Vdc, 5mA @24Vdc (Closed to Battery Negative)
Frequency Inputs:
- Optically Isolated: 3Vrms Min, 30Vrms max, 30Hz – 10Khz
- Compatible Sensors: Magnetic Pickup, Alternator, Hall Effect
Digital Outputs & CAN Communications
Digital Outputs:
- 2 Low-side FETs: 250mA Max
- Configurable: CAN Message or Fault Status controlled
- PWM Control: 3.9Khz frequency, 0-100% duty cycle
CAN Communications:
- 1 CAN Port: J1939 Protocol
- 120 ohm termination resistor (software selectable)
- Programmable: Firmware and configuration via CAN using E-Com cable
Collections: CAN I/O DEVICES
