Streamlined for all applications that require a CAN interface and the right solution when thereÕs a master controller on the machine, it includes the innovative and third party approved Scanreco Integrated Safety Platform (SISPª) and is PL e & SIL 3 safety classed. Despite rain or sun, wind, and snow - the show will go on!
Specifications
- Dimensions: (W x D x H) 138 x 49 x 118 mm | 4 x 1.9 x 4.6 inches
- Weight 560 g | 2 lb
- Protection category: IP67
- Operating temperature (Celsius/Fahrenheit): -25 ¡C to +70 ¡C / -13 ¡F to +158 ¡F
- Storage temperature (Celsius/Fahrenheit): -40¡C to +85 ¡C / -40¡F to +185 ¡F
- Safety classified hardware output:
- LOOP = SIL 3 & PL e
- STOP_OUT = SIL 3 & PL e
- ACT_MOV = SIL 3 & PL e
- CAN bus: CAN open and Safety CAN
- Overload Protection: Yes (for the safety classified outputs)
- Antenna: External
- Radio frequency bands:
- Frequency management: Automatic frequency hopping
- Range (typical): > 100 m
- Power supply to receiver: 12 / 24 VDC
- Fuse: Use external fuse 10 A
- Current consumption: < 200 mA (excluding external loads and in radio mode)
- Connector type: AMPSEAL 14-pin
- BLE: Available for configuration via Scanreco Modulate software
- Cable control: Optional, requires external connector
DOWNLOADS
Sales Flyer
Tx & Rx Pairing Guide
