G6 CAN Receiver

Streamlined for all applications that require a CAN interface and the right solution when thereÕs a master controller on the machine, it includes the innovative and third party approved Scanreco Integrated Safety Platform (SISPª) and is PL e & SIL 3 safety classed. Despite rain or sun, wind, and snow Ð the show will go on!

Specifications

• Dimensions: (W x D x H) 138 x 49 x 118 mm | 4 x 1.9 x 4.6 inches
• Weight 560 g |  2 lb
• Protection category: IP67
• Operating temperature (Celsius/Fahrenheit): -25 ¡C to +70 ¡C / -13 ¡F to +158 ¡F
• Storage temperature (Celsius/Fahrenheit): -40¡C to +85 ¡C / -40¡F to +185 ¡F
• Safety classified hardware output:
  • LOOP = SIL 3 & PL e
  • STOP_OUT = SIL 3 & PL e
  • ACT_MOV = SIL 3 & PL e
• CAN bus: CAN open and Safety CAN
• Overload Protection: Yes (for the safety classified outputs)
• Antenna: External
• Radio frequency bands:
  • 868 MHz
  • 915 MHz
  • 2.4 GHz
• Frequency management: Automatic frequency hopping
• Range (typical): > 100 m
• Power supply to receiver: 12 / 24 VDC
• Fuse: Use external fuse 10 A
• Current consumption: < 200 mA (excluding external loads and in radio mode)
• Connector type: AMPSEAL 14-pin
• BLE: Available for configuration via Scanreco Modulate software
• Cable control: Optional, requires external connector