SenderCAN PLUS (78700683)

SenderCAN PLUS - Configurable with MVP config tool (78700683) *Can be programmed to 78700694 or 78700695

SenderCAN PLUS is a user configurable I/O Module Part Number 78700683 and is designed to convert up to four switch, resistive, voltage, or current inputs into J1939 parameters that are broadcast on a CAN network which can then be used by any J1939 compliant device. Two outputs are available that can be controlled by a J1939 CAN message or driven by internally generated alarms. A separate dedicated input is available to convert a frequency signal into Engine Speed or Vehicle Speed.

A free simple to use Configuration Tool allows the developer to select all the input/output settings for their custom application. A complete J1939 library is included with the ability to create custom J1939 messages.

Specifications

Electrical:

Power supply

• Operating Voltage: 7-35 VDC, protected against reverse polarity.
• Current consumption: 25mA (typ.)
• Inputs: (4) software configurable (0-5V (measurable
• Range 0-4.6V), 0-32V, 4-20mA,
• Resistive, Close to ground switch, Close to positive switch).
• Digital Outputs: (2) low side open-drain, capable of sinking 250 mA max.
• Speed (magnetic pickup): 1 optically isolated frequency input, 3 - 30 VRMS, 30 Hz - 10 kHz.

Communications:

• CAN: (1) CAN 2.0B.
• Protocols: J1939.
• Terminating resistor: Configurable 120 Ohm resistor

Environmental:

• Operating Temperature: -20°C to +85 °C (-4 °F to +185 °F)
• Storage Temperature: -40°C to +85°C (-40 °F to +185 °F)
• Protection: IP65 case, exposed lead ends.
• Emissions/Immunity: SAE J1113-11; (CE) - EN 61236-1:2013, EN 61326-1:2013 (2014/30/EU)
• Case material: High impact ABS enclosure, epoxy filled
• Environmental sealing: IP65 case, exposed lead ends

CAN Outputs (software enabled):

• Monitor and broadcast internal battery voltage.
• Accumulate and broadcast machine hours.