12VDC, 10A Battery Charger, CAN bus, I/O
Applications:
Off-highway Vehicles, Lift Equipment, Power Generation, Electric Vehicles, Fleet and Utility Vehicles, Emergency Vehicles, Power Gensets
Features:
- Charges a 24V or 12V lead-acid battery
- Maximum output power of 300 W (30V / 10A)
- Compact size for easy mounting on a vehicle
- Managed heat dissipation so no fan cooling is required
- Wide ranging operation from 95 to 260 VAC, 45/65 Hz
- Highly efficiency design (90%)
- Inherent power factor correction
- Microprocessor controlled (standard s/w)
- Application-specific charging profiles for OEMs available
- Battery charging without operator involvement
- Configurable for battery optimization
- User defined control I/O (2 digital inputs and outputs) with the default function of the first output set to perform a safety interlock if connected to an external relay tied to vehicle ignition.
- Monitors a remote battery temperature sensor for safe operation and prevention of battery overheating
- Transmits charger condition, line connection status, battery voltage, and charge current over CAN bus
- Error mode shutdown
- Precharge, Bulk Charge, and Constant Voltage charge modes. Equalization is available as needed.
- Automatic retain charge in Float mode
- Permits load connection to battery (after fully charged) with Float Mode enabled
- Software overvoltage protection can be activated to ensure load safety if it cannot tolerate 31Vpeak output
- LED indicator for status of operation
- CAN (SAE J1939) [CANopen® or proprietary CAN on request]
- Electronic Assistant® runs on a Windows operating system for user configuration. An Axiomatic USB-CAN converter links the PC to a CAN bus.
- Additional RS-232 interface to PC or laptop for user configuration and diagnostics Operational from -40 to 85°C (-40 to 185°F)
- Corrosion resistant packaging, IP67 rated for harsh environments
DOWNLOADS
