12VDC or 24VDC, 15A Battery Charger, CAN bus, I/O
Applications:
- Off-highway Vehicles, Lift Equipment, Electric Vehicles, Fleet and Utility Vehicles, Emergency Vehicles
- Power Gensets, Oil and Gas Equipment, Electric Utility Substation Switchgear
Features:
- Charges a 24V or 12V lead-acid battery as well as other battery chemistries
- Maximum output power of 450 W (30V / 15A) or 225W (14V / 15A)
- Designed for mounting in a vehicle or in a stationary engine
- Managed heat dissipation so no fan cooling is required
- Wide ranging operation from 95 to 260 VAC, 45/65 Hz
- Highly efficiency design (90%)
- Inherent power factor correction
- Microprocessor controlled (standard control logic)
- Application-specific charging profiles for OEMs available
- Battery charging without operator involvement
- Configurable for battery optimization
- User defined control input (1 digital input)
- Monitors a remote battery temperature sensor for safe operation and prevention of battery overheating
- Transmits charger condition, line connection status, battery voltage, and charge current over CAN bus
- Four relays to connect to independent alarms for AC fail, charger fail, low battery volts, and high battery volts or for other uses
- Error mode shutdown
- Precharge, Bulk Charge, and Constant Voltage charge modes. Equalization is available as needed.
- Automatic retain charge in Float mode
- Permits load connection to battery (after fully charged) with Float Mode enabled
- Software overvoltage protection can be activated to ensure load safety if it cannot tolerate 31Vpeak output
- CAN (SAE J1939)
- Electronic Assistant® configures the charger to suit the application.
- Operational from -40 to 70°C (-40 to 158°F)
- CE marking and UL pending
- Corrosion resistant packaging, IP67 rated for harsh environments, vibration compliant
- Options: CAN bus to Ethernet Converter CAN bus to Modbus RTU Converter CAN bus to Bluetooth Converter
DOWNLOADS
