🎄GREETINGS OF THE SEASON. KINDLY NOTE WE’RE TAKING A BREAK FROM 4PM FRIDAY 20/12 UNTIL 9AM MONDAY 6/1/25🎄

Axiomatic

AX020200 CAN SAE J1939, Dual Output Valve Controller

CAN SAE J1939, 2 Outputs, LED Indicator 

The CAN to Dual Output Valve Controller is a highly programmable controller, allowing the user to configure it for their application. It must be integrated into a CAN J1939 network of controllers. Its sophisticated control algorithms allow for open or closed loop drive of the proportional outputs.

All logical function blocks on the unit are inherently independent from one another but can be programmed to interact in a large number of ways. While Figure 1A shows the hardware features, Figure 1B shows the logical function blocks (software) available on the CAN2O. All setpoints are user configurable using the Electronic Assistant®.

The CAN-2O has several built-in protections that can shut off the outputs in adverse conditions. These features include hardware shutoffs to protect the circuits from being damaged as well as software shutdown features that can be enabled in safety critical systems.

Applications:

  • Industrial, off-highway (mobile) and marine applications for the control of hydraulic valves
  • Interface with a diesel engine’s electronic control module PWM signal to drive accessories

Features:

  • Two independent, software controlled outputs selectable as: Proportional Current (up to 2.5A); Hotshot Digital; PWM Duty Cycle; Proportional Voltage; or On/Off Digital types (2.5A)
  • 12Vdc or 24Vdc nominal input power
  • 1 CAN (SAE J1939) port
  • Compact plastic enclosure with integral 8-pin connector
  • LED status indication
  • IP67
  • Electronic Assistant® for user programmability
  • CE marking

DOWNLOADS

Spec Bulletin