AX021300 Valve Controller – 6 On/Off

2 Analog and 3 Frequency Inputs, 6 On/Off Outputs, 0-5A Output Rating 

The controller drives up to 6 on/off valves at 5 Amps over a SAE J1939 network. Alternatively, the user can select pulsed, timed or PWM output types. It accepts up to 2 analog inputs (0-5V, 0-20 mA or 4-20 mA) and 3 digital inputs for connection to a variety of analog machine sensors or levers. The user can also select PWM, Frequency/RPM or 16-bit Counter inputs. Each input can be configured to measure the input value and send the data to a SAE J1939 network. In addition, any output on the controller could be configured to use any of the inputs as a control signal or an enable instead of taking the command information from the CAN bus. Standard embedded software is provided. Settings are user configurable via a Windows based Electronic Assistant configuration tool interfacing to the controller via an USB-CAN device. A valuable diagnostic feature involves reading and retaining in the unit’s memory the actual current draw from the solenoid(s). Rugged IP67 rated packaging in addition to a 9-36V power supply input section suits mobile equipment control applications.


  • Off-highway equipment
  • Hydraulic systems


  • 2 user selectable analog inputs (0-5V, 0-20 mA, 4-20 mA, PWM, Frequency/RPM, Digital Active High, 16-bit Counter)
  • 3 user selectable frequency inputs (Digital Active High, Digital Active Low, PWM, Frequency/RPM, 16-bit Counter)
  • 6 outputs for hydraulic On/Off valves
  • User selectable option for outputs: Pulsed, Timed, PWM
  • 12V or 24VDC power (nominal)
  • Standard control logic
  • 1 CAN (SAE J1939), 1 RS-232 
  • CANopen® module available on request (P/N: AX021301)
  • Hardware is available as a platform for application-specific software or setpoints
  • Electronic Assistant® runs on a Windows operating system for user configuration. An Axiomatic USB-CAN converter links the PC to the CAN bus.
  • Rugged IP67 packaging and connectors