Axiomatic

AX030200 16 Analog I/O Module

8 Universal Signal (Analog, Digital, PWM) Inputs, 8 Analog Outputs 

The controller features 1 CAN port for user-defined communications over the bus. It accepts up to 8 analog inputs (0-5V, 0-10V, 0-20 mA or 4-20 mA). Voltage references are provided to power external sensors. The user can alternatively select PWM inputs. Each can be configured to measure the input value, and send the data to a SAE J1939 CAN network. The I/O module provides 8 analog outputs (0-5V, 0- 10V, +/-5V, +/-10V, 0-20 mA, 4-20 mA). Diagnostics messages are provided over the CAN network for the status of inputs or outputs. A RS-232 port is provided for user configuration via PC or for diagnostic purposes. Rugged IP65 rated packaging in addition to a 12 or 24V power supply input section suits power generation and large engine applications. During set-up, using an USB-CAN converter and a PC, the operator can configure the controller via the Electronic Assistant® to suit a variety of applications.

Applications:

  • Power generation, Cogeneration, Stationary power
  • Large engines

Features:

  • 8 inputs are user selectable from the following. ƒ
    • 0-5V, 0-10V, 4-20 mA or 0-20 mA ƒ
    • Digital inputs for interface to switches, etc. ƒ
    • PWM signal, pulse or 16-bit counter inputs from sensors or diesel engine ECM’s ƒ
    • Enable or disable input commands
  • 8 voltage reference outputs power external sensors
  • 8 analog outputs (0-5V, 0-10V, +/-5V, +/-10V, 0-20 mA, 4-20 mA)
  • 12/24VDC input power (nominal)
  • 1 CAN (SAE J1939), 1 RS-232
  • CANopen® module (P/N: AX030201) Rugged IP65 packaging and connectors
  • Electronic Assistant® runs on a Windows operating system for user configuration, saving and writing settings to additional controllers during set-up. An Axiomatic USB-CAN converter links the PC to the CAN bus.

DOWNLOADS