AX130510 Isolated Dual Universal Signal Converter

Dual Universal Signal Conditioner, CAN bus, 4-Way Isolation 

The isolated dual channel universal signal converter accepts two voltage, current, resistive, frequency, RPM, PWM or digital control signal inputs and converts them into two signal outputs (analog voltage, analog current or digital signal). The control can be networked to a SAE J1939 networked engine control system. The unit has 4-way isolation between power, inputs, outputs and CAN.

Using the Electronic Assistant® programming tool, the user can select the desired inputs from the following signal options.

  • 0-5 V, 0-10 Vdc, +/- 5 Vdc, or +/- 10 Vdc
  • 4-20 mA, 0-20 mA or 0-200 mA
  • 20 Ohms to 250 kOhm
  • Frequency/RPM
  • PWM
  • or Digital (Active High or Active Low)

A +5V, 50 mA reference is available to power a sensor input.

The outputs can also be programmed as 0-5 Vdc, 0-10 Vdc, +/- 5 Vdc, +/- 10 Vdc, 0-20 mA, 4-20 mA, Frequency, RPM, PWM or digital on/off signals.

A rugged power supply interface accepts 12 Vdc or 24 Vdc nominal for battery powered machine applications. The unit carries an IP67 rating. The rugged enclosure with 12 pin Deutsch IPD connector is suitable for harsh environments. It operates from -40 to 85°C (-40 to 185°F). The sophisticated control algorithms allow the user to program the controller for a wide range of applications without the need for customer software.


  • Power gen set engine control systems
  • Oil and gas equipment automation
  • Off-highway machine automation